Armour Gates, Horse Stalls, Double Dutch Doors, Barn Gates

Home
Products
Portfolio
About Us
Frequently Asked Questions
Contact Us
Catalog

Double Dutch Doors for Horse Stalls & Barns!

Armour manufactures a variety of Dutch Doors. Dutch doors can be a simple 4'0" half gate or two double panels which allow the top and bottom to open and close independently. Half Dutch Doors are used to retain horses in their stall and are the most economical of hinged stall gate systems. Double Dutch doors are primarily used on the back of stalls to allow access to the back paddock area. The solid double door top can be left open to allow ventilation and lower door closed to retain horse in stall. In some cases double dutch doors are used in the front of the stall. When this is necessary, half dutch bar top doors are recommended to promote adequate airflow.

HALF DUTCH

Half Dutch GateHalf Dutch Doors arrive fully assembled with the highest quality materials available in the industry. There are no loose pieces, lumber to buy and nothing to put together. Armour offers a complete line of lumber fascias: the time honored crossbuck "x", the traditional tongue and groove, or a smoothie. All lumber is surrounded by heavy gauge, non rusting, aluminum channels and miter cut corners. Half Dutch Doors arrive with unmarred lumber fascias because all wood glue and counter sunk wood placements take place in the rear of the panel. The smooth interior surface panels provide a beautiful appearance and protection for hooves. With Armour products, all hardware is included. Additional purchase of hardware "Kit" is unnecessary. Half Dutch Doors include two 6" zinc-plated "Tee-hinges," one zinc-plated Super Latch. All the necessary fasteners for lumber installations are included for the hinges and latch assembly. Half Dutch Doors come in a standard size of 48" wide by 48" high. This half Dutch stall gate will fit your opening of 48-1/2" width and may be used as a single swing shutter in any 48-1/2" wide by 48-1/2" height opening. Custom sizes under 48" wide x 48" high are available at www.armourhorsestalls.com

DOUBLE DUTCH DOORS

Double Dutch GateTwo double dutch door panels arrive fully assembled with the highest quality materials available in the industry. There are no loose pieces, lumber to buy and nothing to put together. Armour offers a complete line of lumber fascias: the time honored crossbuck "x", the traditional tongue and groove, or a smoothie. All lumber is surrounded by heavy gauge, non rusting, aluminum channels and miter cut corners. Double Dutch Doors arrive with unmarred lumber fascias because all wood glue and counter sunk wood placements take place in the rear of the panel. The smooth interior surface panels provide a beautiful appearance and protection for hooves. With Armour products, all hardware is included. Additional purchase of hardware "Kit" is unnecessary. Double Dutch Doors include four 6" zinc-plated "Tee-hinges," two zinc-plated Super Latch. All the necessary fasteners for lumber installations are included for the hinges and latch assembly. Double Dutch Doors arrive in a two standard size panels of 48" wide by 48" high. This Double Dutch stall door will fit your opening of 48-1/2" width by 97-1/2". Custom sizes under 48" wide x 96" high are available at www.armourhorsestalls.com
 

HALF DUTCH BAR TOP

Bar Top GateBar Top Half Dutch Doors arrive fully assembled with the highest 1/8" quality aluminum materials available in the industry. There are no loose, rattling pieces that float and nothing to put together. Welding is performed at concealed locations for an upgraded appearance. Armour offers a complete line of between bar top spacing, one, two, or three inch! (Or two, three or four inch on centers.) With Armour products, all hardware is included. Additional purchase of hardware "Kit" is unnecessary. Bar Top Dutch Doors include two 6" zinc-plated "Tee-hinges," one smaller zinc-plated Super Latch. All the necessary fasteners for lumber installations are included for the hinges and latch assembly. Bar Top Dutch Doors come in a standard size of 48" wide by 48" high. This bar top stall gate will fit your opening of 48-1/2" width and may be used as a single swing window opening in any 48-1/2" wide by 48-1/2" height. When bar top is used in conjunction with the Half Dutch Door your door opening height should be 97-1/2" by the standard 48-1/2" width. Custom sizes under 48" wide x 96" high are available at www.armourhorsestalls.com





Reproduction of articles, artwork, photographs, graphics, wording, format, or code from the Armour Horse Stalls website is strictly prohibited without written consent of Armour Horse Stalls. All Copy Rights Reserved 2024.